5
ASSEMBLY INSTRUCTIONS
ALWAYS
make sure the unit is
unplugged before
beginning
assembly
!
NEVER
move or clean the heater, or change the bulbs, while it is
plugged in
.
1) Carefully turn the
STOVE (A)
upside down and lay it on a clean soft surface.
2) Thread three
SCREWS (C)
through the holes in the leg, and into the stove frame.
Partially tighten with a Phillips screwdriver.
3) Repeat Steps 2 and 3 for the other three legs.
4) Check the alignment and tighten all 12 screws securely with the screwdriver.
(Remark: There are two extra screws in the screw bag as spare parts)
ALWAYS
attach the feet before using!
NEVER
plug in or operate this unit if
the feet are not securely attached!
C
C
A
www.aflamo.pl/en/
