www.AFLglobal.com or (800) 866-7385
2
© 2012, AFL, all rights reserved. Revision 1, 4.30.14
Specifications are subject to change without notice.
Installation Instructions
HCS-INSP001
ITEM
DESCRIPTION
MATERIAL
QTY
-
HIBUS Conductor Suspension Assembly
-
-
1-1
HIBUS Conductor Suspension Clamp - RH
Aluminum
1
1-2
HIBUS Conductor Suspension Clamp - LH
Aluminum
1
2
1/2" Clamping Bolt
SS
2
3
1/2" Belleville Spring Washer
SS
2
4
1/2" Flat Washer
SS
2
5
Bushings
Elastomer
4
6
O-Rings – Bolt Retainer
BUNA-N
2
7
5/8” Attachment Clevis Pin
Galv. Steel
1
8
5/8” Flat Washer - optional
Galv. Steel
2
9
Cotter Pin
SS
1
-
Socket Eye – Type SA – supplied by Customer
-
-
Preparation
Prior to making connection, the conductor and accessory must be clean. Check accessory groove(s) and bushings for foreign particles, removing if
present.
Installation
HIBUS Conductor Suspension Clamp Assembly Installation Parts List:
1.
Remove attachment hardware from HIBUS Suspension Clamp as shown in
Fig. 1
.
2.
Loosen Clamping Bolts (items 2, 3, 4 and 6) to allow the HIBUS Suspension Clamp to hinge open. Squeeze the “ears” (top of the
HIBUS Suspension Clamp) to open as shown in
Fig. 2
.
Fig. 1
COTTER PIN
5/8" ATTACHMENT
CLEVIS PIN
5/8" FLAT WASHER
(OPTIONAL)
5/8" FLAT WASHER
(OPTIONAL)
Fig. 2
1/2" CLAMPING BOLT
1/2" BELLEVILLE SPRING
WASHER
1/2" FLAT WASHER
O-RING
HIBUS SUSPENSION CLAMP SHOWN WITH
HINGE OPEN AND "EARS" SQUEEZED
HIBUS SUSPENSION CLAMP
