4
While in the SmartAuto OTDR Settings Menu:
•
Touch the desired setting field/tab (e.g.
1
Test Type) to display a
sub-menu (where applicable).
•
Touch
A
to navigate to next/previous screen.
•
Touch
B
to return to the previous menu.
•
Touch Use Defaults
C
(if displayed) to reset settings to defaults.
•
Touch ‘Press to start’
D
to initiate testing.
SmartAuto OTDR Settings Summary
1.
Test Type:
Limited to Characterize in FS200-50B/100.
Select Characterize or FleXpress
™
Fast Test in FS200-60/300/304
when Network Type = Point-to-Point.
2.
Pass/Fail Rule:
Indicates selected LinkMap event pass/fail rules.
Touch to select ITU G.671, TIA-568.3-D or User. Touch and hold to
view/edit pass/fail event thresholds.
3.
Network Type:
Limited to Point-to-Point in FS200-50B/100 models.
Select Point-to-Point or FTTH PON in FS200-60/300/304 models. If PON selected, configure split ratio
settings to match expected network splitter configuration.
4.
Fiber Type
: Touch to select G.65x or User fiber type. Touch and hold to view/edit associated Group Index of
Refraction (GIR) and Backscatter Coefficient (BC) settings.
5.
Launch Cord:
Touch to configure length of Launch cable, if present.
6.
Tail Cord:
Touch to configure length of Receive cable, if present.
7.
Launch Quality Check:
Enable to check OTDR connection to launch cord or jumper cable at start of test.
1
2
3
4
5
6
7
OTDR Modes: SmartAuto
™
with LinkMap
®
Display Summary
7
5
6
A
B
D
2
3
4
C
1
