(c) Environmental
Operating Temperature (
MX1M-FX-SC/ST
) -20
o
C ~ +55
o
C
Relative Humidity
0 ~ 95% non-condensing
(d) Mean Time Between Failure (MTBF)
MTBF
>100,000 Hours
(3) Installation
3.1 General
The
MX1M-FX-SC(ST) products are carefully inspected, tested and calibrated before shipment to
ensure stable and trouble-free service. Please check the equipment for any visible damage which may
have been caused during transit.
3.2
Installation requirements
The MX1M-FX-SC(ST) products are installed in mini cabinets as mentioned in section 2.1 for the
ease of mounting. See Fig.3.2 for the mini cabinet.
The equipment is designed to work for individual links and meet the specification within an
ambient temperature of -20
o
C to +70
o
C contained in any type of chassis or cabinets as mentioned above.
Therefore, there is no special provision for cooling purpose. However, extra care should be taken to
prevent excessive ambient heat rise when the unit is installed inside a closed and unventilated enclosure.
3.3 Installation
The
MX1M-FX-SC(ST )models can be put on with different mountings, such as installed into an
enclosure or equipment cabinet; or they can be individually wall-mounted, or mounted on any fixtures,
etc. The units work with external power adaptors for standalone purpose deploying in systems from mini
to large scales. See Fig. 3.2 for the unit with its mini cabinet.
3.4 Power Supply
The MX1M-FX-SC(ST) models are powered by PA/12V power adaptor to work as a
micro(standalone) unit. The 12V DC input voltage by using 2-pins screw terminal at the rear panel of
MX1M-FX-SC(ST).
Fig. 3.1
Power Adaptor
Fig. 3.2
MX1M-FX-ST(SC) unit
MX1M
5
