AFi ECR-4-PoE+, Инструкция по эксплуатации

Страница: 3 / 4

3 1/15/2015 JPK
Cable Connection
Interface Type Support Description Cable Type
RJ45
10Base-T
100Base-TX
1000Base-T Category 3 or above cable
Category 5 or above cable
Category 5 or above cable
BNC (Female) Ethernet over Coax Data RG-59/U or similar
2-pin Terminal Block Power input (48~57VDC) 2-wire
LED Status
LEDs Colour State Indication
Steady Power on
PWR Green
Off Power off
Flashing Data transfer within the coaxial cable
ACT Green
Off No data transfer within the coaxial cable
Steady The converter is ready for data transfer
READY Green
Off The converter is not ready
Flashing Detection stage
ON: 1 sec,
OFF: 5 sec
(Repeat)
Un-connected or broken coaxial cable
ON: 2 sec
OFF: 4 sec
(Repeat)
TX is connected with power adaptor (PoC not required)
ON: 3 sec
OFF: 3 sec
(Repeat)
Overload
PoC 1
PoC 2
PoC 3
PoC 4
Green
ON Power over Coax in use
Steady Ethernet connection of 10/100Base-TX is established
Flashing Transmitting or receiving Ethernet data
100M Green
Off
Neither valid Ethernet connection established nor transmitting or
receiving Ethernet data
Steady Ethernet connection of 10/100/1000Base-T is established
Flashing Transmitting or receiving Ethernet data
Ethernet
1000M Yellow
Off
Neither valid Ethernet connection established nor transmitting or
receiving Ethernet data