background image

Label  Qty. 

Description 

Part Number

A1 

Pro DRY S Air Filter 

21-91046 (Gray Media)

A2 

Pro 5R Air Filter 

24-91046 (Blue Media)

A3 

Pro Guard-7 Air Filter 

72-91046 (Gold Media)

B 1 Housing 

05-12032B2

C 1 Tube 

05-12032B1

Washer, Flat M6 

03-50070

Screw, Hex Head M6 

05-50052

Washer, Lock 

03-50071

Clamp, T-bolt 

03-50499

Screw, Slotted 

03-50045 

Gasket, MAF sensor 

05-01177

Gasket, Temp Sensor 

05-01176

Coupling, Straight 

05-00715

L  

Seal, Trim  (22.5 Inches)  05-00007

Seal, Trim  (11 Inches) 

05-00007

N 1 Grommet 

03-50167

Note: Legal in California for use on race vehicles only. The use of this device on vehicles used on public streets or high-

ways is strictly prohibited in California and others states that have adopted California

emission regulations.

• Please read the entire instruction manual before proceeding.
• Ensure all components listed are present.
• If you are missing any of the components, call customer support at 951-493-7100.
• Ensure you have all necessary tools before proceeding.
• Do not attempt to work on your vehicle when the engine is hot.
• Disconnect the negative battery terminal before proceeding.
• Retain factory parts for future use.

Page 2

Содержание 51-12032

















Отзывы: