Page 2 of 6 | 03042013
User Manual: Rotomolded Portable Spray Units | English
READ ALL INSTRUCTIONS BEFORE OPERATING EQUIPMENT
Model No.: SP-20N, SP-20NK, SP-20NV
Specifications:
Hose .............. 30 feet reinforced hose, 3/8 inch inside diameter
(9 meters reinforced hose, 9.5 mm inside diameter)
Tank Capacity.............................................20 gallons (75.7 liters)
Spray Output....................... 2 gallons/minute (7.5 liters/minute)
Spray Output Distance..................... 10 to 12 feet (3 to 4 meters)
Liquid Temperature ........................ 40˚F to 100˚F (4.4˚C to 37˚C)
Dimensions:
Length ....................................... 22 in (559 mm) approximately
Width ........................................ 17 in (432 mm) approximately
Height ...................................... 48 in (1219 mm) approximately
Weight, including discharge hose and wand:
(Empty) ................................ 48 lbs (22 kg) approximately
Requirements:
Compressed Air Source Requirements: Air regulator (R25) is
factory set at 50 psi (3.4 bar). Operating range is 40 to 80 PSI (3
to 5 bar) with 2 CFM (56.6 l/min).
Chemical Requirements: Follow all instructions from chemical
manufacturer and Material Safety Data Sheet (MSDS).
Air Operated Double Diaphragm Pump Models Offered:
P56: Polypropylene body with Santoprene diaphragm
P56V: Polypropylene body with Viton diaphragm
P56K: Polypropylene body with Kalrez diaphragm
Acceptable Products:
Alkaline cleaners, Caustic cleaners, Sanitizers, and Acids
* D-Limonene may only be used with Kalrez pump
* Chlorine may only be used with Viton or Kalrez pump
DO NOT USE: All hydrocarbons
Read this manual completely and understand the
machine before operating or servicing it.
• Read all instructions before installing or operating unit.
• Always wear appropriate personal protective equipment
(PPE) when operating or servicing unit.
• Always follow all chemical safety precautions and
handling instructions provided by the chemical
manufacturer and Material Safety Data Sheet (MSDS).
• Never point the discharge trigger gun at yourself,
another person, or any object you do not want covered
in chemical.
• Always depressurize unit after use (as described in the
After Use Instructions), and store unit depressurized.
•
Do not exceed an incoming air pressure of 100 psi (7
bar).
• Do not exceed a fluid temperature of 100˚F (37˚C).
• Only use clean and dry air. Air must be filtered and free
of moisture or pump life will be diminished. If needed,
install an air dryer before unit.
•
Do not use an air lubricator before the unit.
PROTECT THE ENVIRONMENT
Please dispose of packaging materials, old machine
components, and hazardous fluids in an environmentally safe
way according to local waste disposal regulations.
Always remember to recycle.
*Specifications and parts are subject to change without notice.
WARNING
