Page 6
16/05/2019
R05.0
1.2.2
Specific danger points
NOTE
Afag HLF linear feeders are state-of-the-art equipment designed in
compliance with the EU Machinery Directive and accepted safety
regulations. Nevertheless, however, risks may arise from using
this equipment that may endanger life and limb of user or third
parties and cause interference with the HLF or other material as-
sets.
1.3
Intended use
The HLF is intended exclusively for the transporting and buffering of components and
can also be used for component sorting. For maximum permissible dimensions and
weights of add-on components, observe details in chapter 2.3 Table 1: Technical data,
chapter 3 Assembly instructions and chapter 4 Operating instructions. Appropriate use
also includes observation of all Notes in these operating instructions.
WARNING
The KLF may not be used:
a)
in damply and wet area
b)
in temperature lower than 10°C or higher than 45°C
c)
in areas where readily flammable media are present
d)
in areas where readily explosive media are present
e)
in heavy polluted or dust- laden area
f)
in aggressive area (e.g. saliferous atmosphere)
None modification or reconstruction are allowed. The Tracks (in the chapter 4.1 Feeder
track design and in the chapter 3.3 Mounting of the useful mass) as well as the accesso-
ries (chapter 6) are excluded from this arrangement.
NOTE
Any use other than that described above is deemed to be improp-
er and will cause the warranty to terminate.
Also refer here to our general terms and conditions of sale.
