Afag DG 20, Инструкция по техническому обслуживанию

Страница: 13 / 36

DG 20 - OI vers. 1.4 gb. 20190712 13
2.1.8 End stop 90°
A fixed end stop can be mounted as option on the DG 20 rotary gripper so that the
rotary gripping pliers can move at an angle of 90° to the end stop from both sides.
The approach is not dampened (fine adjustment must be carried out via the air
choke).The rotary angle is set with a tolerance of +/-5° for 90° (as for the 180° rotary
range).End stop 90°
End stop 90°
Order No: 50433546 (see Chapter 4 Accessories)
Mounting of the 90° fixed end stop (the end stop is part of the accessories)
Mounting of the fixed end stop depends on the desired direction of rotation (to the left
or to the right). The rotary head must then be turned through 180° by hand so that
the end stop acts on the correct side.
Mount the fixed stop using the 2 M2.5 mm Allen screws on the free side of the drive
(see figure).
Installation of the 90° fixed end stop
DG 20 mounting
side for the fixed
stop