Afag DG 16 Скачать руководство пользователя

Страница: 6 / 50

General

6 – 50

Assembly instructions EN



DG 16



Edition 07/2020



Rev. 3.0

1 General

1.1 Contents and purpose of these assembly instructions

These assembly instructions contain important information on assembly,

commissioning, functioning and maintenance of the rotary grippers DG 16 to

ensure safe and efficient handling and operation.
Consistent compliance with these assembly instructions will ensure:



Permanent operational reliability of the rotary gripper,



optimal functioning of the rotary gripper,



timely detection and elimination of defects (thereby reducing maintenance

and repair costs),



prolongation of the rotary gripper's service life.

The illustrations in this manual shall provide you with a basic understanding of

the rotary gripper and may vary from the actual design of your rotary gripper.

1.2 Explanation of symbols

The safety notes are marked by a pictogram and a signal word. The safety notes

describe the extent of the hazard.

DANGER

Danger!

This safety note indicates an imminently hazardous situation which, if not

avoided, will result in death or serious injury.

WARNING

Warning!

This safety note points out a potentially hazardous situation which, if not

avoided, could result in death or serious injury.

CAUTION

Caution!

This safety note points out a potentially dangerous situation which, if not

avoided, can result in minor or slight injuries.

NOTICE

This safety note points out a potentially dangerous situation which, if not

avoided, can cause substantial damage to property and the environment.

Содержание DG 16



















































Результаты поиска

Содержание DG 16

Отзывы:

Похожие инструкции для DG 16

Бренды по названию

Популярные бренды

Afag DG 16, Инструкции по сборке и эксплуатации

Результаты поиска

Содержание DG 16

Отзывы:

Похожие инструкции для DG 16

Бренды по названию

Популярные бренды