AFA STAINLESS AFLZ02, Руководство пользователя

Страница: 17 / 60

Filter
gasket
1 2 3
4 5
With an adjustable wrench and rag,
remove the showerhead from the
shower arm by unscrewing the ball
joint in a counter-clockwise direction. The lter gasket is located at the
opening of the showerhead ball
joint. Remove the lter gasket from the ball
joint. If necessary, use needle-nose
pliers (not provided) and set aside.
Flush the lter gasket with water. Reinstall the lter gasket into the ball
joint threads.
CLEANING AND CARE OF FILTER GASKET
17
Clean the left over Plumber’s Tape
from shower spout threads and apply
a new single layer of plumber’s tape.
Reattach the showerhead by screwing
the ball joint clockwise into the shower
spout threads. Tighten with an
adjustable wrench and rag.
6