A-10
Hot
Cold
12
10
Turn on hot and cold water supply
valve(s) counter clockwise. Run
water and check for leaks.
11
Install new Cartridge (A-10).
Reassemble faucet by reversing
steps.
– Please ensure that the surface of your AFA product has cooled down before cleaning (clean at room temperature).
– Use a soft cloth (e.g. a micro fibre cloth) to dry the product after every use.
– Do not use abrasive cleaning agents or tools – No scratching of the surface.
– Descaling is an aggressive process for products, so you should only do this when and where it is needed. Please wash the
product thoroughly with clean water after using any cleaning chemicals, then dry it with a soft cloth (e.g. a micro fiber
cloth).
– Do not use acidic or caustic cleaning agents or abrasive sponges.
– Do not use degreasing agents or too much cleaning agent.
– Do not spray directly onto the faucet.
– Do not use hard cleaning tools or materials.
– No scratching of the surface.
CLEANING AND CARE INSTRUCTIONS
