Aeware in.k400, Руководство пользователя

Страница: 11 / 14

10
in.k400
Setting the time
Enter Programming mode by
holding Prog . key pressed
down for 3 sec. The display will
show the current time setting.
Setting the hour :
Use Up or Down arrows to
change hour setting ( AM/PM ).
Setting the minutes :
Press Prog . key a second time.
Use Up or Down key to change
hour setting.
Setting fi lter cycle start time
To program the fi lter cycle, you
must enter these parameters:
the start time, duration and
frequency. During a fi lter
cycle, pumps run for one min-
ute to purge the plumbing,
then Pump 1 runs for the
programmed number of hours.
Press Prog . key a third time.
The display will show FSxx , with
"xx" representing the starting
hour.
Use Up or Down key to change
setting.
Setting fi lter cycle duration
Press Prog . key a fourth time.
The display will show Fdxx , with
"xx" representing the duration
in hours.
Use Up or Down key to change
setting.
Filter cycle frequency
Press Prog . key a fi fth time.
The display will show FFxx , with
"xx" representing the number of
fi lter cycles per day (up to 4).
Use Up or Down key to change
setting.
functions