Mirage Digital Evolution
AEV Broadcast Srl via della Tecnica 33, 40050 Argelato Bologna ITALY
www.aev.eu [email protected]
25
6.1.1 MPX INTERNAL
With MPX EXT
command
OFF
, the page
MPX EXT
in the menu it will be disable and it will appear the
message:
MPX SELECTED : INTERNAL a
nd it will available the page
MPX INTERNAL
:
On the
MPX INTERNAL
page you can change the level value of the MPX audio signal at the
MPX Output connector.
Rotating the encoder knob scrolls between the items on the bottom of the display:
•
LEV
, Adjusting the MPX Output Signal and the OUT bar display the signal
•
L & R
bars display the audio signal that it drive to digital stereo coder MPX block
•
SAVE
, a button that saves the changes made
LEVEL
function:
• Place the cursor on
LEV
• A pressure on the knob enables the variation of the level of the MPX output signal
• Turning the knob clockwise increases the signal level
• Turning the knob counter-clockwise decreases the signal level
• The value of signal variation is displayed graphically by means of a vertical bar and the
corresponding value at the base of the bar, both vertically positioned above the
LEV
button
The two bars on the right side display the dynamic trend of the left and right signal that it drived to
stereo coder to generate the MPX output signal.
To save the changes to the values in this form, position the cursor on the
SAVE
button and press the
Jog knob once, at the knob pressure you save the changes and return to the MENU’
To exit the mask, position the cursor on the
ESC
button and press the Jog knob while pressing the
knob returns to the MENU’
