7
14th push-button
AUTOL
(ON/OFF) enabling / disabling of the incoming call self-latching function
15th push-button
REMOT
(PAN/REM/P&R/RSI) selection and activation of the interface command,
keypad (PAN), Logic I / O port REMOTE (REM), serial interface (RSI)
16th push-button
MEETM
(ALW/OHK) MEETING function activation associated hooking line (OHK)
or from engaging an independent line (ALW)
17th push-button
BLANK
(OFF/10…….150), disable (OFF) / enable of the blank control function on
the channel with adjustment of the observation time, from 10 to 150 seconds in increments of 10
seconds and consequent self-release line
Rear panel
The rear panel contains all the connectors for interfacing to the outside world:
1 POWER SWITCH
On / Off Switch
2 AC POWER
network Bowl
3 REMOTE
RJ45 connector for remote control keyboard
4 EXPANDER 1
Jack 6.3 mm connector for connection of the expansions
5 EXPANDER 2
6.3 mm Jack connector for connection of the expansions
6 LOGIC I / O
, cannon DB25 connector for connection of the input logical contacts and output
from the hybrid.
7 Meeting OUT
, XLR cannon, balanced audio output port of the Meeting bus to the mixer
8 Meeting IN
, Cannon XLR connector, audio input port of the mixer on the bus Meeting hybrid
Channel 2 section
9 TEL LINE B
, RJ11 connector, line connection for 2-wire lines
10 TEL LINE A
, RJ11 connector, line connection for 2-wire lines
11 SEND
cannon XLR, balanced audio output port of the channel 2 to the mixer
12 RECEIVE
cannon XLR connector, balanced audio input port from the mixer to channel2
13 4W
RJ11 connector, line connection for 4-wire lines / intercom (optional)
14 TEL SET
, RJ11 connector for connection to channel telephone line 2
Channel section 1
15 TEL LINE B
, RJ11 connector, line connection for 2-wire lines
16 TEL LINE A
, RJ11 connector, line connection for 2-wire lines
17 SEND
cannon XLR, balanced audio output port of the channel 2 to the mixer
18 RECEIVE
cannon XLR connector, balanced audio input port from the mixer to channel2
19 4W
RJ11 connector, line connection for 4-wire lines / intercom (optional)
20 TEL
SET RJ11 connector, connection for telephone sets to channel line 1
