Xtreme
Pag. 21
E l e c t r o n i c B r o a d c a s t E q u i p m e n t
Sec. 5-14 Multi Band Release
The moving speed of the 5 bars
Slow (a full, stable, but very peaceful sound)
Medium-Slow (a full sound suitable for general peaceful music)
Medium-Fast (a full sound suitable for all types of radio format)
Fast (a very lively, full sound, at range limit, suitable for radio rock – super hits)
We recommend Medium-Fast
Sec. 5-15 Multi Band Clip
This controls a circuit which clips the audio signal without introducing any distortion.
-4.0 (a more muffled, compressed, soft, opaque sound)
0.0 (an open, soft sound)
1.0 (a full sound with presence)
6.0 (an exasperated, plastic, synthetic, stretched, brilliant sound)
We recommend from 0.0 to 1.0
Sec. 5-16 Final Clip Drive
Control of final sound pressure.
The sound is more or less amplified to reach a 75KHz maximum deviation
0.0 (the original process sound)
5.0 (an exasperated sound at the limit of the first distortion)
We recommend from 0.0 to 1.0 max
Sec. 5-17 Downward Expander
The noise (ground noise) reducer to be activated if using many tape supports or if the sources going on the air carry ground
noise (links, telephones, etc.).
When this control is activated, and providing there is no sound on one or more bands, the processor’s 5 bands “close“ the
ground noise by compressing it.
When sound returns, ground noise compression is immediately de-activated, with the bargraphs indicating the actual
classic compression.
OFF Disabled
-7.0 Good noise filtering at normal level, excellent for all transmissions
+8.0 Considerable filtering due to substantial ground noise
We recommend -7.0 or OFF
