QUICK GUIDE
D2061 ADSL TESTER
Parameters configuration, if any.
Start the test.
The display shows the Test Status (running or not) and the ADSL link status.
►
The LED
STATUS
is OFF if no test running, is ON (solid green) during
regular test running.
►
The LED
LINK
is OFF if the physical connection is not active, is ON (solid
yellow) during the connection phase, is ON (solid green) when the
connection is active, is ON (solid red) when an error occurs.
The test results displayed are the following:
MODE
Line mode
FAST
ATM Fast mode bit rate
(Kbps)
INTER
ATM Interleaved mode bit rate
(Kbps)
MAX
ATM maximum line rate
(Kbps)
CAP.
Relative Capacity
(%)
MARGN
Noise Margin
(dB)
ATTEN
Attenuation
(dB)
POWER
Output Power
(dBm)
ATU-C ID
ATU-C manufacturer ID
ANSI only
VER
ATU-C compatibility version
ANSI only
Where:
ATM Fast/Interleaved bit rate
:
is the current maximum bit rate available for ATM
Fast or Interleaved path. It depends on the DSLAM configuration.
Only one type of path at time is currently available on the ADSL
line, so the other value will be zero.
ATM maximum line rate
: is the maximum theoretic ATM bit rate, without
overhead, that may be supported by the line.
17