Step 6:
Match the receiver and transmitter. First, turn the
transmitter on by pressing the two buttons on the right side of
the transmitter simultaneously until the screen is turned on.
Choose a dog mode (Dog1, dog2 or dog00) by pressing the dog
switch button. For the first receiver, choose dog 1 mode and
quickly press one of the two buttons in the front, and the first
receiver will be connected with the transmitter. Meanwhile,
the red light goes off and the blue light starts flashing. If you
have another receiver, turn it on, choose dog 2 mode, press any
function buttons, and the second receiver will be paired. You can
train different dogs separately in different dog systems. If Dog00
is selected, both dogs will receive correctional signals.
Step 9:
Start to train the dogs. Put the collar into the receiver and
wear the receiver around dog's neck. Remember to leave one finger
place between the collar and the neck, and then you can train the dogs.
Quick Start
-03-
Step 7:
Check the button functions.
Press the vibrate button, and the
receiver vibrates. Cap the shock test
kit on the metal prongs, and press the
shock button. If the bulb lights up, the
shock function is normal.
Tip 4: The duration for pressing the vibrate or shock button will
lead to difference on the length of the vibration or shock time.
Tip 5: When the transmitter is dead or
malfunctioning, use a toothpick or
similar tools to restart the transmitter
by pressing the reset button.
Step 8:
Adjust the intensity of the shock.
There are 2 buttons on the transmitter's right
side: Up button and Down button. The Up
button is to increase while the Down button is
to decrease the intensity of the shock. 10
levels are available.
In level 0, you can do
nothing with the transmitter.
Tip 6: To avoid misuse, you can lock the transmitter by pressing the
Up and Down buttons simultaneously. Do it again, and the transmitter
will be unlocked.
7
6
Shock button
Vibrate button
Dog
switch
Up button
Down button
Tip 3:After 1 minute of inactivity, transmitter will go into sleep mode.
You can wake it up by pressing any function keys.
10
0
8
DOG
Reset
Button
