Aetertek AT-216, Руководство пользователя

Страница: 6 / 16

Quick Start
6
Step 6: Check the Function buttons (beep, vibrate, shock)
Push the Beep button or Vibrate button, the receiver will produce
beeping sound or vibration. To test the shocks, cap the shock test
kit on the metal prongs, push the shock button to see the bulb
light up immediately.
0 7
8
Step 8 Choose the dog mode(Dog1, or Dog2, or Dog3)
Push the Dog Switch button in the left of the transmitter to
choose a dog mode(Dog1,Dog2,Dog3). Push the button to
change dog mode from Dog1-Dog2-Dog3 . Dog 1 means the
first dog, Dog2 is for the second dog, Dog3 is for the second
dog . If you need to train the 3 dogs separately, please pair
the transmitter and receiver one by one
7
0
7
Step 7 Adjust the intensity or duration of the functions
Rotate the thumbwheel dial to choose the desired levels
of correctional signals.
Note : Longer(shorter) holding beep, vibrate or shock button will
lead to longer (shorter) duration of beep, vibrate or shock time.
Start to train:
Put the collar into the receiver, wear the receiver around dog ’s neck, leave one finger place between the collar and the neck, then it ’s
-04-
ready to train.