5
SET A CALL
The should have been configured before this
step. If it isn’t the case, go to network configuration
chapter:
-
Ethernet, page 7
-
ISDN, page 8
-
POTS, page 8
-
Mobile, page 8
Switching on/off
To switch on, press
3 seconds.
Press the same key 3 seconds to switch off.
Step for wired network
Connect the to the wall socket through the
right network interface (page 3): Ethernet
[2]
, POTS
[4]
or ISDN
[6]
.
Step for mobile network
Set up the unit by pressing
/
Setup / Network /
Mobile Parameters / PIN
. Enter the PIN code for the
SIM card using the keypad if necessary.
Adjust your microphone(s) level
Turn ON the mute LED indicator with the mute key, i.e.
for microphone 1
Set the Level control (
[9]
for mic. 1) on middle position,
white dot of the button in topmost position.
Make a test with your microphone.
If the level is too high or too low on the display, adjust
the gain trough the menu
Setup / Audio / inputs / Input x
Settings / Gain
until you get the right level.
Set a call
Enter directly from the main screen the number or
address of the destination, using the digital keypad.
Press the
0
key twice to have the international
+
symbol.
Press # to switch the keyboard mode between abc,
ABC, 123 (Choice indicated on top right of the display).
Push joystick to the
LEFT
to erase the last digit.
Press the
key to launch the call.
