64
ScoopTeam - User manual - Draft 0002
4.5.2. Connection pads
The “Connection” page includes two such areas, one for each codec (Program and Coordination). In the
single codec mode, the second codec (Coordination) is not used. Apart from this difference, both
connection pads have the same layout and behaviour:
1.
Current status or step. This text provides more details than the color code of the area (see
further).
When the codec is idle, this text holds the last release cause.
2.
Codec : Program or Coordination.
3.
Current network interface. When idle, this is the interface for outgoing calls.
4.
Current coding configuration.
5.
Number or address of remote device. When idle, this is the destination prepared for calling out.
When on line, this is the identification of the remote device.
The color of the area shows the current state of the connection:
Grey : Idle (no connection)
Yellow: Connection in progress
Green: Connection established
Light brown: Connection release in progress
Red: Connection problem
1
2
3
4
5
