Aesthetix MIMAS, Руководство пользователя, Страница: 18 / 23

18
Setup Phono
There are two phono inputs on the Phono Module. The first offers both balanced XLR and a single-ended RCA input
connectors whereas the second contains RCA jacks only. In the Setup Phono submenus, the first is referred to as P1 and
the second as P2. Both can store unique settings for different cartridges.
To set the Phono inputs to their appropriate values, navigate to the Phono Setup
submenu by pressing the SETUP button, then press the right side of the lens to get to the
Setup
Input menu. Continue pressing the right side of the lens until the desired phono
input (P1 or P2) is displayed.
Cartridge Type
As indicated on the previous page, if the cartridge type being used for the currently
selected phono input is a Moving Magnet, press the INPUT button 4 times to display the
Cartridge Type submenu and press the lens Left or Right to change the type to MM.
Resistive Load
From Setup/Input/Phono, press the INPUT button once. The Resistive Load sub-menu
will be displayed.
If the Cartridge Type is set to MC (default), the available Load values will be: 47K, 20K,
10K, 5K, 2.5K, 1K, 750 ohms, 500, 375, 250, 200, 150, 125, 100, 75 and 50 ohms.
If the Cartridge Type is set to MM, the available Load values will be 47K, 20K, 10K and 5K
ohms.
Capacitive Load
Only when the Cartridge Type is set to MM will this sub-menu appear. The available
options are: 100pF, 220pF, 330pF and 470pF.
Gain
If the Cartridge Type is set to MC, the available Gain values will be: 72, 68, 64 and 60dB.
If the Cartridge Type is set to MM, the available Gain values will be: 56, 52, 48 and 44dB.
Figure 6 – Phono Module
Input Active
The factory default setting for Phono1 Input is ON, whereas Phono 2 is OFF.
From the Main menu, to set whether an Input is active or not, press the SETUP button. Press the left or right side of the
Display (UP/DOWN buttons on the remote) to select SETx, where x = the input number to be edited. In this example, P2.
Press the INPUT button once. Press the left or right side of the Display (UP/DOWN buttons on the remote) to turn the
Input On or Off. Press the SETUP button to exit and return to the Main menu.
Phono Input Name
The factory default Phono Input Names are TT 1 and TT 2.
Both phono inputs can be named using up to four characters. The available characters are A-Z; [blank]; 0-9 as well as
several special characters.
To name a phono input, from the Main menu press the SETUP button. Press the left or right side of the Display to select
SET1. Press the INPUT button six times so that the display reads the current name. Press the DISPLAY button once. Use
the left or right side of the Display (or UP/DOWN buttons on the remote) to select the desired character. Press the
DISPLAY button to move to the next character, which identified with a dot to the right of it.
Press the SETUP button to exit and return to the Main menu.
* * *
Both Phono Ground jacks are connected together.