Aesculap Exacta, Перевод оригинальной инструкции

Страница: 16 / 182

ENGLISH
16
While the blade set is removed, you can use the
cleaning brush to remove residual hair from inside the
appliance.
Cleaning the appliance
¾
Clean your appliance occasionally with a damp cloth,
then wipe it dry.
Cleaning the charging contacts
If the charging contacts 7 on the appliance or the charg-
ing contacts 3 on the charging unit are dirty, charging
may not be possible or may be interrupted.
¾
Clean the contacts using a cloth or wad of cotton
wool soaked in alcohol or spirit.
Care of the NiMH rechargeable battery
To maintain the charging capacity of the battery we rec-
ommend occasionally draining the battery until the mo-
tor stops.
WARNING
Damage to casing when screwing on
clipper head!
¾
Do not over tighten the screw.
¾
Make sure the On/Off switch 4
is in the 0 position.
¾
Remove the Allen key 13 from
the base of the charging unit
and use it to loosen the blade
set screw
6 .
¾
Loosen the screw fully and re-
move it.
¾
Push the blade set upwards with
your thumb.
¾
Push the new blade set on until
it snaps into place and secure it
using the screw.