AES WiFi Predator, Руководство по установке, Страница: 27 / 32

27 | P a g e
When the master code is forgotten….
1) Wire a push button (or replicate with wire link) across the Egress terminal and (-)GND.
2) Switch off power for 1 minute.
3) Switch ON power.
4) During the first 60 seconds, press the EG button once to enable the function.
5) Enter the following code..
8 0 0 8 * *
The keypad should now be in programming mode, ready to accept new data.
Using the keypad
Using the standard codes
…
Once you have exited out of programming mode, simply enter the user code.
Using super user codes
? ? ? ? # 1
Activate output 1
? ? ? ? # 2
Activate output 2
? ? ? ? # 3
Activate output 3