P a g e
|
13
SMS Programming
The basic intercom features can be programmed by SMS. To do this, SMS text messages can be
sent from a mobile cell phone.
Each message must begin with a pass code, then the function command, then the data. Each of
these are separated by
a # key as follows…
Passcode
#
command
#
data
#
Enter a new subscriber / resident
Passcode
#
20
#
ID
,
name
,
telnumber1
,
telnumber2
,
telnumber3
,
doorcode,0
#
Passcode
Function
add
subscriber
Apartment
number
Name of
resident
Telephone
numbers
0= resident enabled
1= resident disabled
Keypad
Access
code
TIP
: If you wish to leave a piece of data blank, for example for only entering one or two numbers
and not all three, simply leave that section blank between the commas.
Change a Subscriber / resident
Passcode
#
21
#
ID
,
name
,
telnumber1
,
telnumber2
,
telnumber3
,
doorcode,0
#
Passcode
Function
CHANGE
subscriber
Apartment
number
Name of
resident
Telephone
numbers
0= resident enabled
1= resident disabled
Keypad
Access
code
Delete a Subscriber / resident