User Manual
For GSM-3AB / GSM800E V2.1/ ABK / HB / HBK Wireless
Intercom
This GSM intercom system will call up to 3 telephone numbers in sequence when the call button is pressed.
There are several modes of operation depending on how the unit has been programmed by your installer. The following
instructions will assume default programming.
Intercom calling your phone
Call button
pressed
3
2
1
6
5
4
9
8
7
#
0
*
END
Answer call.
Press * to open
Press # to hold open
OR
Press 1 to release again
and
(Only some gate systems allow
hold open control, depending on
manufacturer)
Option 1) If your number is
saved inside the intercom
memory, just dial it and it will
activate the door or gate
without answering your call.
The intercom will end the call
for you.
Option 2) If your number
is not saved in the
intercom memory, it will
answer the call. Enter the
code on your telephone
keypad to activate the
door or gate (default code
5678 shown).
Access Control Options
END
Dialling…
MY GATE
3
2
1
6
5
4
9
8
7
#
0
*
END
*33*5678#
Using the Android App
If you are using Android, you can purchase the Android app at the google play store (GSM-GATE). The app allows
easy advanced control of the intercom and gates or door by the simple press of the buttons shown. The app will
need configured with the SIM card phone number of your intercom before it can be used.
Once the app is installed, pressing the MENU button on your phone will display the
setting screen below, where you can enter the SIM card phone number.
If your gate system is set for timed operation where it automatically closes after a
preset delay, you may be able to take advantage of the latching features.
Press button to trigger gates
(speed dials your intercom)
Hold open gates
(sends latch SMS command)
Release / un-hold gates
(sends unlatch SMS command)
Press for additional features
1) Check gate open or closed
2) Check reception level
3) Check stored numbers