Setup camera
for Access point or Wifi: (Android)
9.
On your smart phone, enable Wi-Fi then search for Wi-Fi networks in your area.
10.
You will see the IP camera on the WiFi list. It will show up as a character/numerical
name format (PQ1C854-F1C89CA4C9CA, for example), Connect to that IP camera.
11.
If you do not see the IP camera under your Wi-Fi device list, please reset the camera
and wait 30 seconds, then search again.
12.
Open “BVCAM” on your phone.
13.
Press the (+) sign > click “Add new online Camera”, > click “QR Scan” > scan the
QR Code on the bottom of the clock. When the QR Code is read correctly your phone
will vibrate and go back the previous page. Then click “OK”.
14.
Now you will see the camera icon, click the camera icon, (Skip change PW) you
should see the camera live image. Now your smart phone is connecting to the camera
access point (AP).
15.
Then you need set camera to connect to your Wifi network, Go back BVCAM main
screen, Click the cogwheel next to the camera icon > Click “Advance Config” > click
“WiFi Config” > choose your WiFi network from the list > input the password, then
click OK. >Device reboot.
16.
Now the camera will reboot and your phone will disconnect from the IP Camera’s AP
network. Wait 60 secs then refresh the page. You should see the camera icon and
“Online” displayed in blue. Your camera is now connected Wifi network.
Setup Motion Recording:
1.
After your smart phone connect the camera either by WiFi network or the
cameras AP network, Open “BVCAM” and press the cogwheel on the right side
of the camera icon. Then press ”Device Settings (iPhone)” or “Advance Config
(Android)”.
2.
Press “Alarm Config” > Turn on “Alarm Schedule” > Press “OK”
3.
Turning on “Alarm Schedule” will turn on Camera’s Notifications. Scroll down
and turn off “Push Notifications” and “On-Screen Display”, if you don’t want the
camera send alert notification to your phone when the camera see the motion.
4.
Press “SD Card Record Config”. Press the “Record” tab and change record mode
to “On Alarm” for motion detection recording.
5.
Scroll down and click “OK”. Wait 60 Seconds then unplug the cameras power
and plug it back in to restart it.
6.
To view playback, press “Record” at the bottom of the main screen, choose
“Remote SD Card” (2
nd
icon) > Choose Camera name (Cam is default) >
Download. Video’s will need to be downloaded before viewing. Then Press the
white down arrow to view videos downing and blue down arrow to view
downloaded videos.