P a g e
|
10
?
?
0
1
-
0 = start / stop toggle mode (latching)
1-99999 = seconds momentary operation
9
9
9
9
9
or
#
51
=relay1
52
=relay2
53
=relay3
Validate
Delete a user code even if you don’t know the code…
?
?
5
?
?
?
#
10
=relay1
20
=relay2
30
=relay3
Delete code
ID location to be deleted
Validate
Delete an entire group of codes
?
?
0
9
9
9
#
10
=relay1 group
20
=relay2 group
30
=relay3 group
Super delete code
Validate
Programming super user codes
…
A super user code can activate any of the 3 relays
Location
0
2
?
?
?
?
4-8 digit code
Validate
#
Restoring defaults
When in programming mode, you can enter the following sequence…
9
9
9
9
#
When the master code is forgotten….
1) Wire a push button (or replicate with wire link) across the Egress terminal and (-)GND.
2) Switch off power for 1 minute.
3) Switch ON power.
4) during the first 60 seconds, press the EG button once to enable the function.
5) Enter the following code..
8
0
0
8
*
*
The keypad should now be in programming mode, ready to accept new data. The master code will
need changed at this point to something memorable before proceeding.
Using the keypad
Using the standard codes
…
Once you have exited out of programming mode, simply enter the user code.
Using super user codes
