9 |
P a g e
Installation
Power
This intercom comes with a 24v dc power supply. The intercom requires up to 2 amps peak
demand at times, therefore power cable is of extreme importance.
It is preferred the 24v dc PSU is installed within close proximity of the intercom. However, on
occasion this may be difficult to achieve. Please adhere to the cable thickness guide below or the
device may be damaged and rendered out of warranty by the manufacturer.
Up to 2 meters (6 feet) use minimum 0.5mm / 18 gauge cable.
Up to 4 meters (12 feet) use minimum 1mm / 16 gauge cable.
Up to 8 meters (25 feet) use minimum 1.5mm / 14 gauge cable.
Mount the 4G modem as
high as possible and
away from obstructions
such as vehicles, shrubs
and trees to maximise
signal strength.
Do NOT mount modem
at ground level.
Intercom wall/pillar
mounted
Pedestal mounted
version
24v dc PSU
24v dc PSU
Never use fine gauge
cable such as alarm cable
or CAT5 to power this
device. Doing so will void
the manufacturer’s
warranty!