STEP 7
Turn the by-pass valves to the “OFF” position (red valves)
pointing “across” the valve (as shown).
HF 300
Installation Guide
STEP 8
With the faucet still on, open the main water supply valve.
STEP 9
CAUTION:
Inspect all plumbing connections. Check for leaks and make repairs as needed.
!
STEP 10
Open the outlet side of the bypass (Fig. 6).
STEP 11
Slowly open the inlet of the by-pass valve a ¼ turn at a time.
STEP 12
With water flowing at the faucet continue to slowly
open the inlet valve until it is completely open.
STEP 13 (Important)
Leave the faucet open for a minimum of five to ten minutes after
the water runs clear. This last step will flush loose particles from
the carbon filter.
STEP 14
System
is ready for service. Check for leaks and
repair as needed.
IN
OUT
Fig. 6
OUTLET
INLET
By-Pass Valve
