Aertesi VESTA 80 FVI, Инструкция по эксплуатации и техническому обслуживанию

Страница: 22 / 28

CONTROL PANEL
VESTA 80 dehumidifiers are supplied without control
panels. In order to use these appliances they must be
connected to a room humidity regulator, which can be
supplied by the installer, or which may be the model we
supply as an accessory.
30
Hr%
70
50
40
80
60
100
90
1. Regulator knob
1
PREPARATION FOR COMMISSIONING
COMMISSIONING
Before starting the unit make sure that all the pa-
nels are correctly fitted and secured with the spe -
cific screws. Operation without the panels cor -
rectly fitted can lead to malfunctioning of the unit
(poor efficiency, difficulty in draining condensate
with consequent dripping water from the unit...).
Before starting up and checking the operation of the
VESTA 80 dehumidifier it is essential to check that:
- The appliance is correctly positioned;
- The hydraulic circuit shut-off cocks are open;
- The electrical, hydraulic and condensate drain con -
nections have all been made correctly;
- The water pressure with the circuit cold is as prescri -
bed and the circuit has been bled of air.
Switch the unit on/off from the control panel.
- Set the main electrical supply breaker to “On”
ON
OFF
I A
20