EN
PROBLEM
CAUSE /ACTION
the error indicator is flashing
red with continuous and
short sounds
the plug of the power cord is loosened or damaged and
results in power off or poor contact
the glass or mop is too wet and results in too low friction
the glass has impurities attached and results in too high friction
the mop holder is incorrectly installed and results in air leakage
the suction port is blocked
the error indicator is flashing
red and green alternately
with alarming sound
It means trouble occurs on the inside:
contact Aertecnica (for Italy only), or the authorised
foreign retailer
when the robot is moving
up, it can’t reach the upper
positon of the glass due to
slipping
the robot slips on
the glass surface
Button, and control the robot by the
buttons of and on the remote
control to continue the cleaning to left/
right direction
change the mop
after cleaning, there’s residual
round marks on the glass surface
please change a new mop, and spray the cleaning agent to
the lower mop holder 2-3 times
Airò Twist continues to
move and doesn’t stop
automatically
process error: press the Pause button and remove Airò Twist
when it is in use, maybe bug
occurs occasionally
process error: restart Airò Twist
For other causes that are not covered in this manual
contact Aertecnica (for Italy only),
or the authorised foreign retailer
TROUBLESHOOTING
13
