AIR+
Rev 00.00
Pag. 12 di 20
©| Aerservice Equipments S.r.l. | 2020 all rights reserved
é vietata la riproduzione del presente manuale, anche parziale.
SETUP
IDEAL PLACEMENT
There are several important factors to consider when selecting a location for your air purifier:
•
Make sure the location you choose is as far away from the HVAC air return duct as possible. This will
ensure that the purification produced by the air purifier is optimally circulated.
•
Place the unit on top of something tall such as a bookcase, a shelf or a mounting bracket, leaving only
30 to 60 cm between the unit and the ceiling.
•
To ensure the unit works properly, there should be as much space as possible in front of your air
purifier so that it can efficiently process the air in the area.
•
Never place an operating unit on the floor.
INITIAL SETTING
Before using the unit you will need to find the area (or square meters) of the environment. To do this
accurately, take into account all connected rooms with open doorways (the purification does not flow readily
through closed doors). The Air purifier can purify up to 279 m
2
of space.
For example: Suppose you have a 232 m
2
house. The living room is attached to the kitchen, three bedrooms,
the den and a laundry room. The kitchen and three bedrooms’ doors remain open the majority of the time
but the laundry room and den usually remain closed off from the rest of the house. Together, the laundry
room and den have a combined area of 46 m
2
. The area of the environment you would want to set your air
purifier and purify would be 186 m2.
Once you have determined an ideal location for your unit and calculated the area of the environment:
1.
Connect the Power Cord into the unit.
2.
Insert the Power Plug into the wall outlet.
3.
Turn the unit on and set it to “NORMAL” mode (see “OPERATIONS”).
4.
Leave the unit on “NORMAL” mode for at least 24 DAYS to begin with.
5.
After 9hours, set the unit to “HIGH” mode and set the square meters to 24 m
2
.
6.
Gradually increase the square meters setting every 24 hours until you reach the accurate square
meters of your area which you calculated in the beginning steps).
NOTE
Using the purifier at a setting less than the m
2
of the area being treated is acceptable and may be desirable
in an environment relatively free of pollutants.