Attaching the suction mount
1. Carefully choose where to install the suction
mount considering the height and distance of
the holder. For more stable installation, it is
strongly recommended to use the provided
suction plate
2. Do not install the suction base or plate on a
curved surface or soft dashboard
3. Clean any oil, debris, or dust on the area
where 3M base is to be placed. If possible use
an alcohol wipe to help with adhesion
4. Peel off the protection sheet from the 3M
base and stick to chosen area by strongly
pressing the base for an extended period of
time
5. The strength of the 3M tape will perform
perfectly after 4-5 hours of installation
6. Do not use the wireless charging holder for
the above period of time or the mount may
become unstuck
7. Lift the lever up to unlock, and press the
sticky gel pad down strongly to avoid air
leakage, then press the suction lever down to
lock in position
