Aerpro AERA10D, Руководство пользователя

Страница: 27 / 37

AERA
10D
27
aerpro.com
SETTINGS
Settings > Camera Settings
Cam1-4 Label
[REAR-OUTSIDE-AUX-INSIDE-BED-TRAILER]
Allows custom labeling for multiple cameras
Cam 1-3 Trigger [ON-OFF]
Set individual camera triggers ON/OFF
Cam 4 Trigger [ON-OFF-VSS]
Set Camera 4 trigger ON, OFF or Vehicle Speed Sense.
Use VSS Mode when parallel parking aid is
desired (front camera and VSS wire need to be
connected).
On VSS Mode, the front camera will turn on after
shifting from Reverse gear and remain On until
the speed reaches above 5MPH or the display
is touched.
Reverse Camera Audio [ON-OFF]
When set to ON and a microphone is connected,
back up camera audio will be heard through the
vehicle's speakers.
Reset Button
The Reset Button is located on the
lower right hand corner of the display.
To reset the unit the power must be on,
use a paper clip or similar to push the
reset button for 2 seconds and release.
The reset will take a few minutes, do not
turn of power during this time.
Reset Button