Aerotech PRO22SL, Руководство по оборудованию

Страница: 48 / 60

4.3. Motor Mounting
DANGER : To decrease the risk of electrical shock, injury, death, and damage to the
equipment, obey the precautions that follow.
l
Do not connect or disconnect electrical components, wires, and cables while this product
is connected to a power source.
l
Before you do maintenance to the equipment, disconnect the electrical power.
l
Uncouple or otherwise prevent motor-coupled machinery movement when you do ser-
vice to the equipment.
Table 4-1: Hardware Requirements
Stage
Motor
Screw Size
Shaft Coupling
Screw Size
Coupling Screw
Bit Size
Coupling Screw
Torque
PRO225SL/SLE M5 M4 3 mm Hex 44 in·lbs
IMPORTANT : Use Loctite 242 or Loctite 248 on the motor and coupling adapter hardware
( Figure 4-4 ). Loctite products are printed with an expiration date. Before use, be sure that
the expiration date is legible and the product has not expired.
If your stage is used in a vacuum or cleanroom environment, contact Aerotech.
Figure 4-4: Motor Mounting Overview
How to Mount a Motor
1. Remove the hard cover from the stage.
2. Locate the Shaft Coupling access holes (refer to
Figure 4-4 ).
3. Test fit the Motor and Shaft Coupling to the Stage to ensure that you have access to the Shaft
Coupling clamp screws.
4. Apply a small quantity of either Loctite 242 or Loctite 248 to motor and coupling hardware.
5. Attach the Shaft Coupling to the Motor shaft (refer to
Figure 4-5 ). Refer to Table 4-1 for the correct
hardware and torque requirements.
4.3. Motor Mounting PRO225SL/SLE Hardware Manual
48 www.aerotech.com