Aerotech Ndrive QL Series, Руководство по оборудованию

Страница: 16 / 50

Introduction Ndrive QL Hardware Manual
1.1. Electrical Specifications
The electrical specifications for the Ndrive QL are listed below.
Table 1-2: Electrical Specifications
Description Ndrive QL250-C Ndrive QL500-C
Power
Supply
Input Voltage
[Nominal Range]
100-240 VAC (auto-ranging) 100-240 VAC (auto-ranging)
Input Voltage
[Maximum Range]
85-264 VAC (auto-ranging) 85-264 VAC (auto-ranging)
Input Frequency 47-63 Hz 47-63 Hz
Peak Inrush Current
25 A / 115 VAC;
50 A / 230 VAC
25 A / 115 VAC;
50 A / 230 VAC
Input Power 75 W 75 W
Piezo Actuator Output Voltage -30 to +150 V -30 to +150 V
Peak Output Current 250 mA 500 mA
Continuous Output Current 50 mA 175 mA
Warm Up Time 15 Minutes 15 Minutes
Sensor Resolution 17-Bit (closed-loop) 17-Bit (closed-loop)
Voltage Resolution 18-Bit (open-loop) 18-Bit (open-loop)
High-Speed Data Capture 50 ns latency 50 ns latency
Servo Loop Update 24 kHz 24 kHz
16 Chapter 1 www.aerotech.com