Aerotech MPS50SV, Руководство по оборудованию

Страница: 13 / 42

MPS50SV Hardware Manual Overview
1.2. Basic Specifications
Table 1-3: MPS50SV Series Mechanical Specifications
Mechanical Specifications
(1)
MPS50SV-5
Travel 5 mm
Accuracy
1.0 mm/rev Ball Screw
Standard ±2.5 µm
Calibrated
(2)
±1.0 µm
0.5 mm/rev Lead Screw
Standard ±3.0 µm
Calibrated
(2)
±1.25 µm
Resolution (minimum incremental motion) 0.05 µm
Bidirectional
Repeatability
(2)
1.0 mm/rev Ball Screw ±0.75 µm
0.5 mm/rev Lead Screw ±1.0 µm
Straightness ±3.0 µm
Wedge Ratio 6.82:1
Maximum Speed
1.0 mm/rev Ball Screw
DC Motor (-M1) 0.8 mm/s
Stepper Motor (-M2) 0.15 mm/s
0.5 mm/rev Lead Screw
DC Motor (-M1) 0.4 mm/s
Stepper Motor (-M2) 0.1 mm/s
Load Capacity
(3)
6 kg
Stage Mass 1.4 kg
Material
Stainless-Steel Carriage;
Anodized Aluminum Body
1. Specifications are for single-axis systems measured 25 mm above the tabletop; performance of multi-axis system is payload and
workpoint dependent. Consult the Aerotech factory for multi-axis or non-standard applications.
2. With Aerotech controllers.
3. Payload specifications are for a single-axis system.
www.aerotech.com Chapter 1 13