Aerotech MPS50SL, Руководство по оборудованию

Страница: 21 / 50

MPS50SL Hardware Manual Mechanical Specifications and Installation
2.3.1. For XY Assemblies and Special Cases
To access the inner mounting holes, the stage table must be moved. The following is the procedure for
moving the table and mounting the stage (see
Figure 2-6 ).
W A R N I N G : Do not attempt to manually back drive a MPS50SL. Doing so will damage the
MPS50SL.
1. Drive the stage to one end of travel to access two of the hidden mounting holes for the stage.
2. Disconnect all electrical power.
3. Mount the stage with M3 low-head socket cap screws (LHSCS). See Table 2-2 for hardware details.
4. Reconnect the stage to the power supply and drive the tabletop to the other end of travel to access the
other two hidden mounting holes.
5. Disconnect all electrical power.
6. Mount the stage to the base using the remaining mounting holes with M3 LHSCS.
Table 2-2: Table Mounting for XY Assemblies and Special Cases
Mounting Hardware
Typical Screw
Torque
Inner Mounting Holes (XY
assemblies and special cases) M3 Low-head Socket Cap Screws, 10 mm long, stain-
less steel
0.9 N·m
Figure 2-6: Access To All Mounting Holes
www.aerotech.com Chapter 2 21