Aerotech BLMF Series, Руководство пользователя

Страница: 10 / 36

Safety BLMF Hardware Manual
W A R N I N G : To minimize the possibility of electrical shock, bodily injury or death the
following precautions must be followed.
1. Aerotech's motors are meant to be part of a drive package consisting of an amplifier and a
controller. The motor relies on the drive package for fault protection. Aerotech, Inc. does
not approve of their motors being used in any other way.
2. To prevent electrical shock hazards, allow only qualified persons to install and service this
equipment.
3. Equipment grounds must be in place and maintained to reduce the risk of serious or
potentially fatal injury from electric shock.
4. Moving parts can cause crushing or shearing injuries. Access to all stage and motor parts
must be restricted while connected to a power source.
5. Never install or operate equipment that appears to be damaged.
6. Disconnect electrical power to the motor before performing maintenance procedures. In
addition, uncouple or otherwise prevent motor-coupled machinery from moving the motor
during service.
7. Motors are capable of very high speeds and acceleration rates. Always avoid being in the
direct path of moving machinery.
8. The motor over temperature sensor must be monitored by the drive and used to shut down
the drive in the event of excessive motor temperatures.
9. Cables can pose a tripping hazard. Securely mount and position all system cables to avoid
potential hazards.
10. Do not expose this product to environments or conditions outside of the listed
specifications. Exceeding environmental or operating specifications can cause damage to
the equipment.
11. The BLMF motor must be mounted securely. Improper mounting can result in injury and
damage to the equipment.
12. Use care when moving the BLMF motor. Lifting or transporting the BLMF motor improperly
can result in injury or damage to the BLMF.
13. This product is intended for light industrial manufacturing or laboratory use. Use of this
product for unintended applications can result in injury and damage to the equipment.
14. If the product is used in a manner not specified by the manufacturer, the protection
provided by the product can be impaired and result in damage, shock, injury, or death.
10 www.aerotech.com