Aerotech AOM130 Series, Руководство пользователя

Страница: 19 / 28

AOM130 User Manual Operation
Chapter 3: Operation
3.1. Full 360° AZ and EL Positioning
Rotational freedom can be extended to a full 360° by loosening the tangent arm clamping screws on the
Azimuth or Elevation axes with a long arm hex 5/16 inch Allen Wrench. Manually rotate each axis anywhere
in a 360° range. Re-tighten the tangent arm clamping screw (torque to 25 N·m).
D A N G E R : Do not attempt to manually move the azimuth axis until the Azimuth Axis
Tangent Arm Clamping Screw has been loosened.
Figure 3-1: Azimuth Axis Tangent Arm Clamping Screw
www.aerotech.com Chapter 5 19