Aerotech ANT95LZS Series, Руководство по оборудованию

Страница: 20 / 48

1.4. Air Requirements
The air supply to the counterbalance should be clean and liquid water should not be present.
l
If nitrogen is used, it must be 99.99% pure and filtered to 0.25 microns. [Recommended]
l
If compressed air is used, it must be filtered to 0.25 microns, dry to 0º F dew point, and oil free.
The maximum allowable input pressure specification is 0.6 MPa (87 psi).
The low friction air cylinder consumes air as described in Figure 1-1 .
Figure 1-1: Counterbalance Air Flow vs. Counterbalance Pressure
Figure 1-2: Air Inlet Location
1.4. Air Requirements ANT95LZS Hardware Manual
20 www.aerotech.com