Aerotech ANT130LZ Series, Руководство по оборудованию

Страница: 23 / 52

Tightening torque values for the mounting hardware are dependent on the properties of the surface
to which the stage is being mounted. Values provided in
Table 2-2 are typical values and may not be
accurate for your mounting surface. Refer to Section 2.1. for mounting locations and dimensions.
Table 2-2: Stage to Mounting Surface Hardware
Mounting Hardware
Typical Screw Torque
M6 x 0.7 SHCS 7.0 N·m [61 lb·in]
Figure 2-2: Mounting Hole Pattern (and Pneumatics Cylinder Clearance)
Hardware Manual ANT130LZ
www.aerotech.com 23