Aerotech ADRS Series, Руководство по оборудованию

Страница: 29 / 44

ADRS Hardware Manual Electrical Specifications and Installation
Table 3-8: ADRS100 Motor Specifications [Aerotech Motor Model: S-76-35]
S-76-35
(ADRS100)
Performance Specifications
(1,5)
Winding Designation -A (-M1) -B (-M2)
Stall Torque, Cont.
(2)
N·m .48
Peak Torque
(3)
N·m 1.92
Electrical Specifications
(5)
Winding Designation -A (-M1) -B (-M2)
BEMF Const., line-line,
Max
V
pk
/krpm 29.1 14.5
Continuous Current,
Stall
(2)
A
pk
2.0 4.0
A
rms
1.4 2.8
Peak Current, Stall
(2)
A
pk
8.0 16.0
A
rms
5.7 11.3
Torque Constant
(4, 9)
N·m/A
pk
0.24 0.12
N·m/A
rms
0.34 0.17
Motor Constant
(2, 4)
N·m/√W 0.075
Resistance, 25°C, line-
line
Ω 10.5 2.6
Inductance, line-line mH 1.40 0.35
Maximum Bus Voltage V
DC
340
Thermal Resistance °C/W 1.83
Number of Poles -- 14
1. Performance is dependent upon heat sink configuration, system cooling conditions, and ambient temperature
2. Values shown @ 75°C rise above a 25 °C ambient temperature, with housed motor mounted to a 250 mm x 250 mm x 6 mm
aluminum heat sink
3. Peak force assumes correct rms current; consult Aerotech.
4. Torque constant and motor constant specified at stall
5. All performance and electrical specifications ±10%
6. Specifications given are for the motor only. When integrated into a housing with bearings additional losses should be considered.
7. Maximum winding temperature is 100 °C (thermistor trips at 100 °C)
8. Ambient operating temperature range 0 °C - 25 °C; consult Aerotech for performance in elevated ambient temperatures
9. All Aerotech amplifiers are rated A
pk
; use torque constant in N·m/A
pk
when sizing
www.aerotech.com Chapter 3 29