background image

EGT-100 Exhaust Gas Temperature Indicator 

Page 8 of 11

 

 

Aerospace Logic Inc. 

3150 Ridgeway Drive, Unit #43, Mississauga, Ontario, L5L 5R5, CANADA 

Tel. (905) 569-3887 | Fax. (416) 352-5854 | Email. [email protected] 

www.aerospacelogic.com 

EGT-100 Operations & Installation Manual – Ver. 1.9 – June 5, 2003 

 

 

5. 

Operation

 

 
Once power is applied to the instrument it will display the model number and 

tESt

 message with the complete display lit. Immediately following this it will 

display the temperature information and default to the 

STEP

 mode. 

 
 

MANUAL MODE

 

 
In the manual mode (

A M S

 switch in the 

M

 position) movement between the 

different manually selectable functions is achieved by moving the 

A M S

 

switch once to the 

S

 position and then releasing it. The order of display is:  

 

STEP

 

Sequentially displays each cylinder temperature for 5 seconds. 

 
In the 

STEP

 mode the instrument will display the STEP message for 

approximately five seconds before starting the step process. Once started it 
will step through all cylinders. When the last is reached, it will revert back to 
the first. 
 

1

   

Display temperature information for cylinder 1 

2

   

Display temperature information for cylinder 2 

3

   

Display temperature information for cylinder 3 

4

   

Display temperature information for cylinder 4 

 
For 6 cylinder instruments two additional displays are: 
 

5  

Display temperature information for cylinder 5 

 

Display temperature information for cylinder 6 

 
For instruments with the optional voltmeter function: 
 

v

   

Displays line voltage present on the instrument supply bus 

 
If the internal intensity option has been selected: 
 

^

  

Increase 

intensity 

 
Moving the 

A M S

 switch to the 

A

 position will increase the brightness of the 

display.  Move the switch back to the 

M

 position when the desired brightness 

is reached. 
 

v

  

Decrease 

intensity 

 
To decrease the brightness move the 

A M S

 switch to the 

A

 position. Move 

the switch back to the 

M

 position when the desired brightness is reached. 

 

Содержание EGT-100 Series












Отзывы: