Tag Mounting | 9
No Flange
The T3-BD tag can also be supplied without flanges. The tag can be fixed
on a surface by applying adhesive on its back or using Velcro or double-
sided tape. It can also be placed into a sleeve.
Figure 4. AeroScout T3-BD tag without flange
Note the following:
Avoid putting glue on the battery cover or the tamper switch hole.
Apply 1x1’’ Velcro or double-sided tape patches as shown in Figure
5.
Figure 5. 1x1’’ Velcro or double-sided tape patches
However, the tamper switch cannot work if covered by the 1x1’’
Velcro/double sided tape patches. Therefore, in this case it is
recommended to use glue or a thin tape and avoid covering the
tamper switch area.
Cradle
The AeroScout T3-BD tag cradle can be used to incorporate the tag in
existing equipment. The cradle is fixed on the asset (e.g. a machine) and the
tag is snapped into the cradle. With the cradle, tags can be easily removed
and replaced without the need to handle screws of adhesives.
