Aeros SX, Руководство пользователя, Страница: 7 / 24

5.5. Place the bores identified by the lines 1-2, ... 9 to the left,
and the bores identified by the lines 10, ... 18-1 to the right.
5.6. Make sure that each gore is folded properly and the seams of
each bore are parallel, being straight and slightly tensioned. To
achieve the desired effect you may use little sand bags.
5.7. Join the two groups of lines and the pull down line, making
one group of lines.
5.8. Fold each gore set as “S”-shape reducing the width of the
gores in this way.
10