background image

Air Impact Wrench 7431             

    Http://www.aeroprotools.com                                                               

 

 
Technical Data 

 

Square drive……………………………………………………………………………………1/2”(13mm) 

Capacity Bolt Size ……………………………………………………………………………...5/8” (16mm) 

Free speed………………………………………………………………………………………7,500rpm 

Max torque……………………………………………………………………………………..420ft/lb(567N.m) 

Avg. air consumption…………………………………………….…………………………..5 cfm(142.5 l/min) 

Operating pressure……………………………………………………………………………...90psi(6.3bar) 

Air inlet size…………………………………………………………………………………….1/4” 

Air hose …………………………………………………………………………………………3/8”ID 

Weight……………………………………………………………………..…………………...5.70Lbs(2.6kgs) 

A weighted sound pressure level……………………………………………………………….

 

92.6dB(A) 

Sound power level………………………………………………………………………………103.6dB(A) 

Vibration in the handle………………………………………………………….…….………..2.8m/s

2

 

 

Important Safety Rules 

1 When using the tool always wear safety goggles, an appropriate face mask or respiratory equipment. 

2. Always ensure machine is switched off before connecting to air supply. 

3. Disconnect any machine from the air supply before changing blades or discs, and before servicing any type of 

machine. 

4. Always keep your air tool clean and lubricated. Daily lubrication is essential to avoid internal corrosion and possible 

failure. 

5. Do not wear watches, rings bracelets or loose clothing when using air tools. 

6. Using only light weight coil hoses from a tool to the wall or compressor coupling. Do not fit quick change couplings 

onto the machine as vibration can cause the coupling to fail. 

7. Do not overload the machine. Allow the tool to operate at its optimum speed for maximum efficiency. 

8. Do not increase the air pressure above the manufacturers recommended level, as excessive overload can cause the 

machine casing to split. Also this creates excessive wear on moving parts and possible failure. 

9. In the interests of safety and possible damage to the machine/operator, always ensure that the machine has stopped 

before putting it down after use. 

10. Always ensure that the work piece is firmly secured leaving both hands free to control the machine. 

11. Always ensure that the accessories such as blades, discs, sockets, etc. are designed for use with the machine. Also 

correctly and securely fastened before connecting the machine to the air supply. 

 

 

Operating Instruction 

 

Description 

Durable  twin  hammer  impact  wrench  mechanism,Pressure-feed  lubrication,Adjustable  power  regulator,Variable 

speed,High  Torque,  Front  exhaust,Sheer  power  and  performance  features  to  tackle  the  toughest  jobs  with  ease  and 

proven durability and economy. 

 

Содержание AP7431







Отзывы: