15
Attach the bow-side reinforcing rail (19) to frame 5,
part (18).
This rail (19) is 165 mm long and is fitted flush with the
top edge, as is the reinforcement on the other side.
16
Now yet the stern-face reinforcement (20) to part (18).
The reinforcing rail (20) is 206 mm long.
17
Here we see the location of the bow-side reinforcement
(16) on frame 6 (part 15).
The reinforcing rail (16) is 100 mm long, and runs parallel
to the bottom edge of the opening at a point 13 mm
below it, as shown in the drawing.
18
This drawing shows where the stern-side reinforcement
(17) is fitted to part (15).
The reinforcing rail (17) is 210 mm long. This rail should
also be positioned 13 mm from the bottom of the
opening.
18
19
18
20
15
16
13mm
13mm
15
17
