AEROMOTIVE
Part # 13209
INSTALLATION INSTRUCTIONS
CAUTION:
Installation of this product requires detailed knowledge of automotive
systems and repair procedures. We recommend that this installation be carried
out by a qualified automotive technician.
Installation of this product requires handling of gasoline. Ensure you are
working in a well ventilated area with an approved fire extinguisher nearby.
Extinguish all open flames, prohibit smoking and eliminate all sources of ignition
in the area of the vehicle before proceeding with the installation.
When installing this product, wear eye goggles and other safety apparel as
needed to protect yourself from debris and sprayed gasoline.
WARNING!
The fuel system may be under pressure. Do not open the fuel system until
any pressure has been relieved. Refer to the appropriate vehicle service manual
for the procedure and precautions for relieving the fuel system pressure.
NOTE: Testing the enclosed regulator by applying air pressure or vacuum to the vacuum port with a
hand-held pump will yield poor results, due to the slight air leakage through the adjustment screw
threads. This minute leakage, which is typical of all adjustable fuel pressure regulators, does not, in any
way, affect the performance of the regulator.
The enclose Aeromotive regulator utilizes four o-ring sealed AN-08 inlet/outlet ports around the
perimeter of the regulator and one o-ring sealed AN-10 style bypass port on the bottom of the
regulator (This port requires a cutoff AN-10 style fitting Aeromotive P/N 156-08-F or equiv.); these
regulator ports are NOT PIPE THREAD and utilize NO THREAD SEALANT.
The enclosed Aeromotive regulator is designed to be used with high flow (300 gph minimum) belt
or cam driven fuel pumps similar to Aeromotive P/N 11105 or 11107. Performance may be
degraded if a similar pump is not used.
Aeromotive system components are not legal for sale or use on emission controlled motor vehicles.
